Introduction
This exclusively designed machine can assemble base, handle, and
pins. Automatically leveling and shaping, feeding, assembly,
unloading etc. Stable and easy HMI program for operation and
control.
1. This assembly line is suitable for φ25, φ35, and φ40 mm ceramic
cartridge's base, handle, and pin assembly.
2. Stable running, working up to 20 hours non-stop.
3. Cycle time: 2.5S/Unit 10000 sets / 8 hrs
4. This assembly line is environmentally friendly, green
technology.
Assemble Procedures
1# Base Assemble
2# Handle Assemble
3# Vacancy
4# Pin assemble
5# Detection
6# Qualified products unloading station
7# Vacancy
8# Unqualified products unloading station
Key Modules
1. Leveling & Shaping system: it contains a storage plate, base,
controller, etc. All 3 parts are separately transported to the
pointed location by independently feeding plates.
2 Feeding system: cylinder, mechanical structures, etc. The feeding
mechanism transports the parts to the pointed position one by one
and gets ready for assembly.
3. Transfer system: it contains a motor, controller, workpiece
fixture, photoelectric positioning, and other mechanical parts.
After the equipment start working, the Leveling & Shaping system
placed all the products in groups and transported them by feeding
system to the positioning areas to get assembled.
4. Operation & control system: PLC +Touch screen
Working Environment
Working environment temperature: 0 ≤ 45 ℃;
Humidity: 20 ≤ 90% RH;
Power supply: single-phase 220VAC, 50Hz, 2KVA
Compressed air: 2 kgf/cm, tolerance: ±10%;
Installation Area: 1400mmX1400mmX1900mm
No strong magnetically zone, and no noxious gas in the workshop
We provide customized lines according to the customer’s products,
production throughput, and layout plan of the workshop, please
contact us for a free consult. Turnkey service is available.
